APEX FORD/DIN CUP


 

APEX DIN / FORD CUP

DIN/FLOW CUP
FORD DIN CUP

 The Biuged/DIN Standard and Dip Viscosity Cups are produced with an easily removable orifice. Cup and orifice production tolerance permits replacement of the orifice without loss of acceptable tolerance. In accordance with Deutsche Normen DIN 53211.

        It complies with DIN 53211 standard and is applied for low viscosity liquids 

Main Technical Parameters

■ Volume of Cup100ml±1ml

■ Body is made of anodized aluminum

■ Stainless steel orifice, interior polished

Ordering Information  

    BGD 127/2---Din 2# Flow CupOrifice Dia.2mm

    BGD 127/4---Din 4# Flow CupOrifice Dia.4mm

    BGD 127/6---Din 6# Flow CupOrifice Dia.6mm

    BGD 127/8---Din 8# Flow CupOrifice Dia.8mm

    BGD 127/4P---Hand-Held Din 4# Flow CupOrifice Dia.4mm

    BGD 1272---Din Flow Cup Nozzles

FORD CUP
FORD DIN CUP1

Ford Cups produced by our company are in accordance with International Standard ASTM D1200, D333, and D365. For easy measurement of the viscosity of paints, inks, lacquers and other liquids. All Biuged Ford cups are machined anodic oxidation aluminum with removable stainless steel orifice and are guaranteed to be within 2% throughout the recommended range of use.

Main Technical Parameters

■  Internal Diameter50±0.05mm

■  Outer Diameter86±0.1mm

■  Internal Orifice Length10±0.1mm

■  Production Tolerance±2%           

■  Details of each Ford Cups

Details/Ford cup Ford Cup
(2#)
Ford Cup
(3#)
Ford Cup
(4#)
Ford Cup
(5#)
Hand-Held Ford Cup
(4#)
Internal Vertical Height 43±0.1mm 43±0.1mm 43±0.1mm 43±0.1mm 43±0.1mm
 Internal Orifice фmm 2.53 mm 3.4 mm 4.1 mm 5.2 mm 4.1 mm
External Orifice фmm 5.0±0.5mm 5.5±0.5mm 6.0±0.5mm 7.6±0.5mm 6.0±0.5mm
Centistokes Range 25-120 49-220 70-370 215-1413 70-370
Efflux Timesec±0.2 40-100 25-105 20-105 20-105 20-105
Ordering Information BGD 125/2 BGD 125/3 BGD 125/4 BGD 125/5 BGD 125/4P